SDORFEHS(1)

NAME
sdorfehs - window manager without mouse dependency

SYNOPSIS
sdorfehs [-hv]
sdorfehs [-d dpy] [-s num] [-f file]
sdorfehs [-d dpy] [-s num] [-i] -c command [-c command ...]

DESCRIPTION
sdorfehs is a window manager without fat library dependencies, fancy graphics or dependence on a mouse.

The screen can be split into non-overlapping frames. All windows are kept maximized inside their frames.

All interaction with the window manager is done through keystrokes. sdorfehs has a prefix map to minimize key clobbering.

The options are as follows:

-c command
    Send sdorfehs a command. There must be a sdorfehs instance running as window manager for the given display/screen for this to work. Do not forget to quote the command if it contains spaces. For example:

        sdorfehs -c "echo hello world"

-d display
    Set the X display to use or send commands to.

-f filename
    Specify an alternate configuration file. If this is not given, sdorfehs will try $HOME/.config/sdorfehs/config and execute each command when starting up.

-h  Show summary of options.

-i  Execute commands given with -c in interactive mode. That means it will behave exactly as if called with C-a: like prompting for missing arguments and things like that.

-s number
    Only use the specified screen.

KEY BINDINGS
To avoid conflicts with other programs, all default sdorfehs key bindings start with an escape key which, by default, is C-a (Control-a). Some important default key bindings:

C-a?
    Show key bindings

C-a a
    Send a Control-a to the current window

C-a c
    Start an X terminal

C-a n
    Switch to next window

C-a p
    Switch to previous window

C-a 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
    Switch to window number 0 | 1 | 2 | ...

C-a k
    Close the current window

C-a K
    XKill the current application

C-a s | S
    Split the current frame into two vertical | horizontal ones

C-a Tab | Left | Up | Right | Down
    Switch to the next | left | top | right | bottom frame.

C-a Q
    Make the current frame the only one

C-a:
    Execute a sdorfehs command

C-a F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12
    Switch to vscreen number 0 | 1 | 2 | ...

Further default key bindings can be found in parentheses after the commands in the next section.

COMMANDS AND DEFAULT ALIASES

abort
    (C-a C-g) Do nothing and that successfully. ( Useful if you pressed C-a in error).

addhook event command
    Add a hook: run command whenever event is called. Possible events are:

    deletewindow
        Run after a window is withdrawn.

    key Run whenever a top level key is pressed (by default C-a).

    newwindow
        Run after a new window is mapped.

    quit
        Run before exiting sdorfehs.

    restart
        Run before restarting sdorfehs.

    switchframe
        Run after a frame actually switched, but before the window in it is focused.

    switchscreen
        Run when the user switches to a different screen.

    switchvscreen
        Run when the user switches to a different virtual screen.

    switchwin
        Run after a new window is selected. (With dedication, it may already be inactive again, if it was put into another frame)

alias alias command
    Add alias as new way to call command.

bind key command
    alias for "definekey root key command"

banish
    (C-a b) Banish the rat cursor to the lower right corner of the screen.

banishrel
    Banish the rat cursor to the lower right corner of the current window. If there isn't a window in the current frame, it banishes the rat cursor to the lower right corner of the frame.

chdir [directory]
    If the optional argument is given, change the current directory of sdorfehs to directory. If nothing is given, change it to the value of the environment variable "HOME".

clrunmanaged
    Clears the unmanaged window list.

cnext
    Like next but switch to the next window with another resource class than the current one. (That means the next window belonging to another type of application than the current one.)

cprev
    Like prev but switch to the previous window with another resource class than the current one. (That means the previous window belonging to another type of application than the current one.)

colon sdorfehs-command (C-a):
    Execute sdorfehs-command interactively. (i.e. ask for possible missing arguments.)

cother
    Like other but switch to the window of the current vscreen that was last accessed and has another resource class but is not currently visible.

curframe (C-a F)
    Show a bar marking the current frame.

definekey keymap key command
    Add a new key binding in keymap for key to execute command. Default keymaps are top normally only containing C-a, which reads a key from root, containing all the normal commands.

    Note that you have to describe ":" by "colon", "!" by "exclam" and so on. If you cannot guess a name of a key, try either C-a key and look at the error message, or try :describekey root and pressing the key.

dedicate [0 | 1]
    Consider the current frame dedicated/chaste (1) or promiscuous (0).

    A dedicated frame will not accept new windows. When new windows are to be focused, they will be opened in a non-dedicated frame instead.

    If no argument is given, toggle the current dedicateness. By default no windows are dedicated.

delete (C-a k)
    Close the current window.

delkmap keymap
    Deletes the keymap named keymap, that was generated with newkmap. The keymaps top (or whatever was specified by set topkmap) and root cannot be deleted.

describekey keymap
    Grab the next key. Similar to readkey, describekey shows only the command in keymap, that would be executed by readkey.

echo text
    Show text as sdorfehs message.

escape key
    Update the default escape key to key.

    Strictly speaking it updates the readkey root command in the keymap top to key, the other binding in root to key, and meta binding in root to key without modifiers or C-key if key has no modifiers. (If set topkmap was called with an argument other than top that will be used instead of top.)

exchangedown (C-a C-Down)
    Exchange the window in the current frame with the window in the frame below the current frame.

exchangeleft (C-a C-Left)
    Exchange the window in the current frame with the window in the frame left of the current frame.

exchangeright (C-a C-Right)
    Exchange the window in the current frame with the window in the frame right of the current frame.

exchangeup (C-a C-Up)
    Exchange the window in the current frame with the window in the frame above the current frame.

exec shell-command (C-a)!
    Spawn a shell executing shell-command.

execa shell-command
    Spawn a shell executing shell-command, without remembering the current frame, so that _NET_WM_PID declaring programs will be placed into the frame active when they open a window instead of the frame active when sdorfehs gets this command.

execf frame shell-command
    Spawn a shell executing shell-command, showing _NET_WM_PID supporting programs in the given frame instead of the frame selected when this program is run.

execv vscreen shell-command
    Spawn a shell within a specific vscreen vscreen, executing shell-command as in the 'exec' command (i.e., using "sh -c"). This is not likely to work well with 'winaddcurvscreen' set to 1 anywhere in the configuration file.

execw shell-command
    Spawn a shell executing shell-command, but wait for it to finish. This should behave the same as exec but will wait for completion. Use timeout(1) if it might hang, or sdorfehs will hang itself waiting for completion. Use the 'exec' shell builtin as the first word in the command string to get similar behavior to execa owing to the forked pid remaining stable and known to sdorfehs.

fdump [screenno]
    Output the defining data for all frames of the current screen, or for screen number screenno if this is specified.

focus (C-a Tab)
    Focus the next frame.

focuslast
    Switch to the last selected focus.

focusleft (C-a Left)
    Switch to the frame to the left of the current one.

focusdown (C-a Down)
    Switch to the frame beneath the current one.

focusright (C-a Right)
    Switch to the frame to the right of the current one.

focusprev
    Focus the previous frame.

focusup (C-a Up)
    Switch to the frame above the current one.

frestore frames
    Replace the current frames with the ones specified in frames in the format as generated by fdump.

fselect [frameno] (C-a f)
    If an argument is supplied, switch to a frame given by number frameno.

    If no argument is given, show a frame selector in each frame and wait for a key to be pressed. If the key matches an existing frame selector, this frame gets focused.

    Frame selectors are by default the numbers starting with zero, but they can be changed by set ting framesels.

getenv variable
    Output the value of the environment variable variable.

getsel
    Paste the current X Selection into the current window.

gravity [nw | w | sw | n | c | s | ne | e | se]
    Change how in its frame the current window is aligned.

help [keymap]
    If the optional parameter keymap is given, list all keybindings in this keymap, otherwise list all key bindings in keymap root.

hsplit [l/p | [-]pixels] (C-a S)
    Split the current frame into left frame and a right frame. If no parameter is given, split in halves. If two numbers separated by a slash (‘/’) are given, the left one is l times the p th part and the right one (p - l) times the p th part of the prior width. Otherwise the right half is pixels wide or the left one is pixels wide, depending whether there is ‘-’ in front of the number or not.

inext
    Like next but switch to the next window with the same resource class as the current one. (That means the next window belonging to the same application as the current one.)

info (C-a i)
    Output the current the width, height, window number and window name of the current window. ( What name means is chosen by “set winname”.)

iprev
    Like prev but switch to the previous window with the same resource class as the current one. (That means the previous window belonging to the same application as the current one.)

iother
    Like other but switch to the window of the current vscreen that was last accessed and has the same resource class but is not currently visible.

kill (C-a K)
    Close the X-connection of the X-client responsible for the current window.

lastmsg (C-a m)
    Reshow the last message.

link key [keymap]
    Do what key is bound to in the keymap keymap if supplied. Otherwise what key is bound to in keymap root.

listhook event
    List all commands specified with addhook to be executed when even event occurs.

meta [key] (C-a t)
    Send the escape key (that which normally is C-a) to the current window. If a key is specified, this is sent instead. Note that some applications by default ignore the synthetic key that is sent using this command as it is considered a security hole. xterm is one such application.

newkmap keymap
    Generate a new keymap named keymap. This keymap can be used to add new key-command mappings to it with definekey and can be called with readkey.

next (C-a Return | C-a n | C-a space)
    Switch to the next window in the current vscreen.

nextscreen (C-a N)
    Switch to the next screen. (If you have multiple physical ones.)

number new [old]
    Give the number new to the window with the number old or the current window.

only (C-a Q)
    Remove all frames on the current screen except the current frame and maximize this one to the size of the whole screen.

other (C-a C-a)
    Switch to the window of the current vscreen that was last accessed but is not currently visible.

prev (C-a p)
    Switch to the previous window in the current vscreen.

prevscreen (C-a P)
    Switch to the previous screen. (If you have multiple physical ones.)

prompt [prompt]
    sdorfehs will ask the user for input, showing prompt (or a single colon, if no argument is given) and output the input the user has made. Note that this command probably does not make much sense in interactive mode.

putsel x-selection
    Replace the X selection with the text x-selection. It can be inserted into the current window with getsel.

quit
    Quit sdorfehs.

ratinfo
    Display the x y coordinates of the rat cursor relative to the screen.

ratrelinfo
    Display the x y coordinates of the rat cursor relative to the current window or current frame if no window is focused

ratwarp x y
    Move the rat cursor to the position (x, y).

ratrelwarp deltax deltay
    Move the rat cursor to (deltax, deltay), relative to the current position.

ratclick [button]
    Simulate a rat click with button (button 1=left button if none given).

rathold (up | down) [button]
    Simulate pressing|releasing rat button button (1=left button if none given).

readkey keymap
    Grab the next key pressed, and execute the command associated to this key in keymap. To show it is waiting for a key, sdorfehs will change the rat cursor to a square if waitcursor is set. This command is perhaps best described with its usage in the default configuration: by pressing C-a, which is the only key in the keymap top , the command "readkey root" is executed. The next key then executes the command in keymap root belonging to this command.

redisplay (C-a l)
    Extend the current window to the whole size of its current frame and redisplay it. (Useful to redisplay normal windows or bring transient windows to the full size of the frame as only normal windows are maximized by sdorfehs)

redo (C-a U)
    Revert the last undo of frame changes.

remhook event command
    Remove command command from the list of commands to be called when event event is hit. (The command has to specified, as an event can have multiple commands attached to it.) Use "listhook hook" to get a list of all attached commands.

remove (C-a R)
    Remove the current frame and extend some frames around to fill the remaining gap.

resize [deltax deltay] (C-a r)
    If deltax and deltay are supplied, resize the current frame by that (i.e. move the bottom right corner by the given offsets and then move this frame and resize adjacent frames to make the frames fill the whole screen again.)

    If in interactive mode no arguments are supplied, resize the current frame interactively:

    Return
        finish resizing
    C-g, Escape
        abort resizing
    C-n, Down, j
        grow vertically
    C-p, Up, k
        shrink vertically
    C-f, Right, l
        grow horizontally
    C-b, Left, h
        shrink horizontally
    s   shrink to size of current window

    While resizing interactively, changes are in multiples of the amount of pixels given by set resizeunit (by default 10).

restart
    Restart sdorfehs.

sdump
    Output the list of all screens. The screens are separated by commas. Each screen is shown as 6 values: its number, its x-coordinate, its y-coordinate, its width, its height and if it is currently selected (1=true, 0=false).

select (- | name | number) (C-a ')
    If a number is given, switch to the window with number number. If a name is given, switch to the window in the current vscreen with name name. Blank the current frame, if - is given.

set [variable [value]]
    If no argument is given, output all sdorfehs variables and their values.

    If one argument is given, output the value of sdorfehs variable variable. Otherwise set variable to value. What values are valid depends on the variable. See the section VARIABLES later in this document for details.

setenv variable value
    Set the environment variable variable to value. ( Environment variables will be passed to all programs started from sdorfehs.)

sfdump
    Output all frames similar to fdump, but not limited to one screen, but all screens at once and with the screen number after each frame.

sfrestore frames
    Replace the current frames with the ones specified in frames in the format as generated by sfdump.

shrink
    Shrink the current frame to the size of the current window with in.

split [split] (C-a s)
    alias for vsplit

source file
    Read file and execute each line as sdorfehs command.

sselect screennumber
    Switch to the screen screennumber. (If you have multiple physical ones.)

smove [screen]
    Move the current window to the current frame and vscreen on screen screen and focus it.

stick
    Mark the current window as sticky in its current frame, making it unavailable to other frames when selecting an available window.

swap dest-frame [src-frame] (C-a x)
    Exchange the window in src-frame (or the current frame if there is no second argument) with the window dest-frame (or ask interactively which frame to swap with if there is no argument).

title newname (C-a A)
    Overwrite the title of the current window with newname. All following sdorfehs commands will only know the window under the new name.

unalias alias
    Remove the alias alias.

unbind key
    alias for
        undefinekey root key

undefinekey keymap key
    Remove the binding for key from keymap.

undo (C-a _, C-a u)
    Un-do the last change to the frameset. (Like splitting, resizing, deleting, ...)

    The amount of steps that can be undone is specified by the variable maxundos.

unmanage [name]
    Add name to the list of unmanaged windows. Thus, windows of this name will not be managed but allowed to choose their position themselves.

    In non-interactive mode calling it without arguments will print the list.

    The list can be cleared again by calling clrunmanaged.

unsetenv variable
    Remove variable variable from the list of environment variables.

unstick
    No longer consider the current window as sticky in its current frame, making it again available to appear in other frames.

verbexec cmdline
    Spawn a shell executing cmdline after showing a message with the command.

version (C-a v)
    Output version and compile time information.

vmove [vscreen]
    Move the current window to the current frame on vscreen vscreen and switch to it. Specify by either name or number.

vnext
    Switch to next vscreen.

vother
    Switch to the last-accessed vscreen before the current one.

vprev
    Switch to previous vscreen.

vrename
    Rename current vscreen.

vscreens
    Output a list of all vscreens with their number.

vselect vscreen
    Select the vscreen named vscreen.

vsplit [l/p | pixels-from-top | -pixels-from-bottom] (C-a s)
    Split the current frame into upper frame and a lower frame. If no parameter is given, split in halves. If two numbers separated by a slash (“/”) are given, the upper one is l times the p th part and the lower one (p - l) times the p th part of the prior height. Otherwise the lower one is pixels from bottom wide or the upper one pixels from top high, depending whether there is a “-” in front of the number or not.

windows [format] (C-a w)
    In interactive mode, show the list of all windows in the current vscreen for the duration specified by the variable msgwait. If msgwait was zero, toggle between indefinitely showing and not showing.

    The messages are shown in columns or rows depending on the value of winliststyle in the format set by set winfmt. The following substitutions happen in format:

    %a  application name (resource name)
    %c  resource class
    %f  frame number
    %g  gravity of the window
    %h  height of the window
    %H  unit to resize the window vertically (height_inc)
    %i  X Window ID
    %p  process ID
    %l  last access number
    %M  string Maxsize, if it specifies a maximum size
    %n  window number
    %s  window status ( ‘*’ is active window, ‘+’ would be chosen by other, ‘-’ otherwise)
    %S  screen number
    %t  window name (see set winname),
    %T  the string “Transient”, if it is a transient window
    %w  width of the window
    %W  unit to resize the window horizontally (width_inc)
    %x  xrandr screen number
    %%  litteral ‘%’

    Additionally there can be a positive decimal integer number between the percent sign and the format string to specify the length this value should be truncated to if longer. ( For example: %20t)

    In non-interactive mode, output the list of windows in the current vscreen line by line. The format string can be overwritten by the optional parameter format.

VARIABLES
sdorfehs variables can be shown and set with set. The following variables are supported:

barborder pixels
    Selects how thick the frame around sdorfehs' s bar, prompt, and message windows is.

    Default is 1.

barbordercolor color
    The color of the bar, prompt, and message windows sdorfehs creates.

    Default is black.

bargravity nw | w | sw | n | c | s | ne | e | se
    Select the location where message and prompt bars appear.

    Default is nw.

barinpadding 0 | 1
    If there is padding, determines whether the bar appears at the edge of the screen (1) or at the edge of the window area (0).

    Default is 1.

barpadding x y
    Set horizontal padding of sdorfehs windows to x and vertical padding to y.

    Default is 14 10.

barsticky 0 | 1
    When set to 1, the bar remains on screen at all times and when messages or lists are not being shown, it displays the output of the current window information formatted with stickyfmt.

    Default is 1.

bgcolor color
    The background color of the windows sdorfehs creates.

    Default is black.

border pixels
    Selects how thick the frame around windows is.

    Default is 1.

bwcolor color
    The border color of unfocused windows.

    Default is black.

fgcolor color
    The foreground color of the windows sdorfehs creates.

    Default is #eeeee.

font font
    Make sdorfehs use font font.

framefmt format
    Choose the default format for the window label shown when selecting a different frame.

    Default is Frame %f (%Wx%H).

framemsgwait seconds
    The duration the ‘Current frame’ indicator is shown. If seconds is zero, wait until the next interactive command. If seconds is -1, don't show any message.

framesels selectors
    Override the frame selectors fselect uses. The first character is the selector for the first frame, the second character is the selector for the second frame and so on.

    Using this variable, one can directly access more than 10 frames.

    Default is an empty string, which is equivalent to "0123456789".

fwcolor color
    The border color of the focused window.

    Default is black.

gap pixels
    Specify the number of pixels surrounding each frame, except for the outer edges which border the screen or its padding.

    Default is 20.

historysize number
    Specify maximum number of values kept in input history.

    Default is 20.

winaddcurvscreen 0 | 1
    When set to (1), new windows will always start in whatever the current vscreen, ignoring vscreen of the origin process.

    Default is 0.

ignoreresizehints 0 | 1
    When set to (1), window resize hints will be ignored, forcing windows to be the exact sizes of their containing frame.

    Default is 0.

inputwidth pixels
    Determine the width of the input window.

    Default is 200.

maxsizegravity nw | w | sw | n | c | s | ne | e | se
    Set the default gravity new self-maximized windows will get. Possible values are the same as in the gravity command, which changes the gravity of an existing window: cardinal points or numbers 1 to 9.

    Default is c.

maxundos number
    The maximal amount of step sdorfehs can undo with the undo command.

    Default is 20.

msgwait seconds
    The duration the message window is shown. If seconds is zero, wait infinitely.

    Default is 3.

onlyborder 0 | 1
    Determine whether to show borders and gaps (1) or not (0) when there is only one frame on the screen.

    Default is 1.

padding left top right bottom
    Set how much space at the borders of the screen will not be used.

    Default is 20 20 20 20.

resizefmt format
    Choose the default format for the window label shown when interactively resizing a window.

    Default is Resize frame (%Wx%H) which shows the window width and height divided by any PResizeInc hints, which for terminals will show the number of columns and lines.

resizeunit pixels
    Set the amount of pixels interactive resize will add/subtract in each step.

    Default is 5.

rudeness number
    Show or set what kind of windows are allowed to jostle into the foreground.

    number is a bitwise OR of the following values:

    1   Transient windows may raise.
    2   Normal windows may raise.
    4   New transient windows end up in the foreground.
    8   New normal windows end up in the foreground.
    16  Window raise from different vscreen will be permitted.

    Default is all allowed except vscreen switch, i.e. 15.

startupmessage 0 | 1
    Decide whether to show a greeting message at startup.

    The default is 1.

stickyfmt format
    Choose the default format for current window information shown in the bar when the barsticky setting is enabled.

    Default is %t.

topkmap kmap
    Make kmap the top keymap sdorfehs grabs directly.

    The default value is top.

transgravity nw | w | sw | n | c | s | ne | e | se
    Set the default gravity new transient windows will get. Possible values are the same as in the gravity command, which changes the gravity of an existing window: cardinal points or numbers 1 to 9.

    Default is c.

vscreens number
    Set the number of virtual screens (vscreens).

    Default is 12.

warp 0 | 1
    Decide if focusing a window moves the rat cursor to the place it had been last time this window was focused, or not.

    Default is 0 (off).

wingravity nw | w | sw | n | c | s | ne | e | se
    Set the default gravity new normal windows will get. Possible values are the same as in the gravity command, which changes the gravity of an existing window: cardinal points or numbers 1 to 9.

    Default is nw.

waitcursor 0 | 1
    Determine whether to change the rat cursor when waiting for a key (1) or not (0) See readkey and describekey.

    Default is 1.

winfmt format
    Choose the default format for the windows command.

    Default is %n%s%t.

winliststyle row | column
    Determines whether windows are shown in rows or in columns.

    Default is column.

winname title | name | class
    Choose what is considered the "name" of the window by sdorfehs:

    title
        The title of the window.
    name
        The resource name of the window.
    class
        The resource class i.e. the name of the application.

    Default is title.

FILES
~/.config/sdorfehs/config
    Configuration file read at startup time, if present.

~/.config/sdorfehs/control
    Unix socket which accepts remote control commands sent by sdorfehs -c.

~/.config/sdorfehs/bar
    FIFO/named pipe which accepts input to show on the sticky bar when barsticky is enabled.

EXIT STATUS

AUTHORS
-nosplit sdorfehs is maintained by joshua stein <jcs@jcs.org> and is derived from ratpoison which was originally written by Shawn Betts <sabetts@gmail.com>.